URSA Mini Pro is designed to take advantage of all the standard accessories you are familiar with using on larger, full size cameras. Choose from an incredible range of Blackmagic Design or 3rd party accessories to build exactly the perfect rig! You get a completely customizable camera that lets you choose the lens mount, external microphone, rails, cages, 3rd party batteries and more that you need!Find Reseller
The Blackmagic URSA Mini Shoulder Kit lets you go from tripod to handheld in an instant. It features a quick release mount, shoulder pad, two front rosettes and rail mounts so you can quickly latch the camera into a tripod or instantly unlatch and move it onto your shoulder for handheld shooting. Designed to be well balanced and comfortable while sitting on your shoulder, the Blackmagic Shoulder Mount Kit provide mounting for your URSA Viewfinder and makes the URSA Mini Pro perfect for handheld shooting.
If your project calls for a lot of over the shoulder or handheld shooting, you’ll want to add the Blackmagic URSA Viewfinder. You get a high resolution 1920 x 1080 color display that lets you get incredibly accurate focus and the screen is so sharp it’s just like using an optical viewfinder on a traditional film camera. The viewfinder can be adjusted for either left or right eye use. Simply plug it into the power and SDI viewfinder output, slide it onto the camera using the Shoulder Mount Kit, then start shooting! The viewfinder features a sensor that turns off the screen when you’re not using it to save power and extend the life of the OLED screen.
Quickly and securely mount professional microphones using the Blackmagic URSA Mini Mic Mount kit! The kit includes both a flat mount and an angled mount, along with two screws for securing the mounts to the camera. The microphone holder features rubber o-ring bands to isolate the microphone from vibration and shock, and to eliminate noise from bumps while recording. The flat mount can be used on larger rigs to keep the microphone away from other accessories, and the angled mount is perfect for compact rigs.
Adding a Blackmagic Video Assist to your URSA Mini Pro camera gives you an additional external display that can be tethered and used by the DoP or other members of the crew to watch and evaluate shots as they’re happening. The monitor supports 3D LUTs and includes powerful focus assist and exposure tools. In addition, you can record Blackmagic RAW on your camera and use the 5” or 7” Blackmagic Video Assist 12G HDR models to simultaneously record ProRes or DNxHR files to high speed SD cards!
Blackmagic URSA Mini Recorder adds a high capacity SSD recorder to your camera for longer recording times. You can record to fast 2.5inch SSDs, including U.2 NVMe disks. Designed specifically for URSA Mini Pro 12K, it attaches between the back of the camera and the battery, and is controlled via the USB-C. Everything is controlled directly from the camera, so you don’t have to operate the recorder separately. The SSDs can even be mounted on your computer using a Blackmagic MultiDock so you can edit and color correct right from the cards!
HyperDeck Studio Mini is a miniaturized broadcast deck that records and plays back broadcast quality 10-bit video as ProRes files onto commonly available UHS-II SD cards. They’re small enough to add to your URSA Mini Pro as a back up recorder and, if you’re working on a live multi camera production with URSA Mini Pro and an ATEM switcher, you can add a HyperDeck Studio Mini as ISO recorders and master program recorders. That means you’ll have archival copies from each camera along with a copy of the final finished program!
URSA Mini Pro has great stereo microphones built in, along with two XLR microphone inputs that feature 48V of switchable phantom power so you can use the highest quality professional microphones, without needing to carry around extra power supplies or portable mixers! You can choose from the audio industry’s highest quality hand held, wireless lapel or shot gun microphones for the ultimate in audio flexibility!
Control your camera and lenses remotely using the universal standard 2.5mm LANC input based remote control. Choose from dozens of third party LANC equipment manufacturers that will work with your URSA Mini Pro. You can simply connect a LANC controller to get easy remote control of camera start/stop as well as control over iris and focus!
The 9 mounting points on the top, bottom and side of the camera open it up to all kinds of 3rd party accessories from professional tripods and cages to rails for lenses, top handles and much more! With ¼ inch mounting points on the base of the URSA Mini Pro body it’s compatible with any tripod, crane or slider. On the top of the camera you can use the mounting points to add viewfinders, shot gun microphones or anything else you may need!
URSA Mini Pro uses a standard 4 pin broadcast power connector that is compatible with most 12V - 20V power supplies. For on location or mobile shooting you can add a battery plate for using third party batteries from companies such as IDX, Anton Bauer and more. That means you can use your existing battery solutions with URSA Mini Pro and you are not forced to spend thousands of dollars on a completely custom battery system.
Learn more about Blackmagic OS
Learn more about Blackmagic RAW
Learn more about Post
Learn more about Gallery
Learn more about Tech Specs
Get an amazing Super 35mm 4.6K sensor with 15 stops of dynamic range up to 120 fps or 2K at 300 fps! Includes features such as 3 x ND filters, Blackmagic RAW, USB-C external disk recording and more!
58 950 kr
Featuring a revolutionary 12K Super 35mm 80 megapixel sensor with Generation 5 Color Science and 14 stops of dynamic range, URSA Mini Pro 12K is designed for high end feature film production.
98 100 kr
The Blackmagic URSA Mini Pro EF Mount kit is available if you ever need a spare EF lens mount in addition to the original EF that comes with your URSA Mini Pro.
1 750 kr
Optional PL lens mount which features contact pins for compatibility with Cooke’s i/Technology protocol allowing lens information to be saved as metadata and used in software like DaVinci Resolve.
2 450 kr
The URSA Mini Pro F Mount lets you use your favorite Nikon stills lenses with smooth high precision mechanical iris control. Now you can pair digital film quality with classic Nikon AF‑S G and AF‑D series lenses.
3 750 kr
Optional B4 lens mount with precision optics and spherical aberration correction specifically designed to match the camera’s sensor so you can use your existing B4 HD broadcast lenses.
3 900 kr
High resolution viewfinder for URSA range of cameras includes full HD OLED display and true glass optics for perfect focus.
16 400 kr
Turn URSA Mini into the ultimate live camera with a professional 7 inch studio viewfinder!
19 650 kr
Set of 9 shims and baffle tool for making precise changes to the flange focal distance for URSA Mini Pro's EF, PL or B4 mount.
VLock compatible battery plate for attaching third party batteries to URSA cameras.
1 000 kr
Gold mount compatible battery plate with Molex connector for attaching third party batteries to URSA cameras.
1 000 kr
Add a shock and vibration isolated professional microphone mount to your URSA Mini or URSA Mini Pro camera!
1 400 kr
Now you can control Blackmagic Design cameras by inserting control commands into the SDI feed from an Arduino!
Now you can record 12-bit Blackmagic RAW files onto fast 2.5 inch SSDs, including the latest 7mm U.2 NVMe Enterprise SSDs which transfer data at speeds of up to 900 MB/s!
4 100 kr
Optional side hand controller for URSA Mini Pro with record start/stop, iris and focus buttons built in. Standard rosette and LANC for attaching to the side of the camera or relocating it to the front of the camera with the URSA Mini Shoulder Kit.
1 950 kr
Be ready to shoot anywhere! Kit includes shoulder pad with built in rosettes, rail mounts, integrated tripod quick lock release and top handle.
4 050 kr
The 58mm lens cap easily snaps on to protect your camera’s lens from scratches, dust, moisture, and fingerprints when the camera is not in use.
The 77mm lens cap easily snaps on to protect your camera’s lens from scratches, dust, moisture, and fingerprints when the camera is not in use.
The 82mm lens cap easily snaps on to protect your camera’s lens from scratches, dust, moisture, and fingerprints when the camera is not in use.