Integrated Design

Integrated Design

Video, talkback and tally!

ATEM Camera Converter and ATEM Studio Converter are designed to be used at either end of a live camera connection. Now you can easily connect cameras to production switchers, even when they are huge distances apart. Each converter has been designed to make it easier than ever to connect to cameras with video, audio, talkback and tally. The battery powered ATEM Camera Converter is located at the camera and is designed to be used in remote locations. The ATEM Studio Converter has a rack mount design that contains all connections built into the unit.

Find Reseller
Intergrated Design

ATEM Camera Converter is machined from solid aluminum for an incredibly strong design.

Heavy Duty Machined Metal Design

Light and Durable

ATEM Camera Converter’s machined aluminum design is lightweight and incredibly strong. The precision cut chassis houses advanced electronics and video connectors are recessed for added protection. Rubber feet on the bottom of the unit are included for grip when you use the ATEM Camera Converter on a desk, plus a machined belt clip can also be attached. The ATEM Studio Converter’s rack mount design has an elegant aluminum front panel, featuring push to talk buttons for talkback communication, plus microphone and headphone connections. There is a built in speaker and volume control so you can also monitor talkback channels in a control room environment.

Designed for Live Production
Built in aluminum clip allows
ATEM Camera Converter to be mounted on your belt!

Designed for Live Production

Strong with long life battery built in

ATEM Camera Converter and ATEM Studio Converter connect together using a single mode optical fiber connection that can stretch up to 28 miles in distance. The ATEM Camera Converter is designed for portable use and features an internal rechargeable battery, along with all the connections required to send video, audio and talkback over the optical fiber link. The ATEM Studio Converter is designed to fit into your equipment rack and has 4 separate optical fiber connections. The optical fiber signal is converted back to SDI video and analog audio outputs for connecting each camera to your switcher. Program feeds with talkback and tally are sent to each connected camera.

Ergonomic Controls

Control all settings and talkback from the front panel

ATEM Camera Converter’s controls are conveniently located in a rubberized button strip on one side of the unit. LED indicators show the remaining battery power and confirm that optical fiber and video signals are present. The unit’s power button needs to be pressed and held for 2 seconds to ensure the unit is not accidentally turned off during use. Illuminated push to talk buttons on the front of the ATEM Studio Converter give easy operation of talkback to one or more cameras. They can be locked so the talkback channel is left open when required.

Ergonomic Controls

Easy to use front panel controls are backlit for easy visibility in low light.

Long Life Battery

Run without power for 3 hours

As the ATEM Camera Converter is designed to be used in remote camera positions, it includes a built in rechargeable battery that provides more than 3 hours battery life. With a wide 12‑31V power range you can use an external battery to power the unit if longer operation is required where no mains power source is available.

Long Life Battery
Built in battery indicator shows you the charge on your battery.

Highest Quality Connections

Recessed design for SDI and HDMI connectors keeps them safe from damage

Highest Quality Connections

You can connect an SDI or HDMI camera to ATEM Camera Converter’s built in inputs. Audio from a camera’s on board microphone will be embedded into the signal unless the external audio inputs are connected. You also have microphone and headphone connections and can use either professional noise cancelling headsets or even iPhone earphones! ATEM Studio Converter has 4 bi‑directional optical fiber connections. Each connection converts the incoming camera signal to SDI and de-embeds any audio to analog audio outputs. Talkback audio and a return program or auxiliary feed is returned to each camera point, along with a tally signal that illuminates an LED on the camera converter to show that the camera is live!

Studio Converter
Next Page - Tech Specs

Next Page

Tech Specs

Learn more about Tech Specs Arrow

ATEM Converters

ATEM Talkback Converter 4K

ATEM Talkback Converter 4K

Support talkback for up to 8 cameras for Blackmagic Studio Cameras. Includes 12G-SDI for all formats up to 2160p60, front panel mic and headset connections and more.

NZ$5,259

Buy Now
ATEM Studio Converter

ATEM Studio Converter

4 x optical fiber converters in 1 RU design, supports talkback and tally.

NZ$4,005

Buy Now
ATEM Camera Converter

ATEM Camera Converter

Battery powered optical fiber converter with talkback, tally and mic inputs.

NZ$1,239

Buy Now