Connect Cameras with SMPTE Fiber Cable!

The Blackmagic Camera Fiber Converter and Blackmagic Studio Fiber Converter allow you to remote power and send all video, audio, talkback, and tally connections to the camera using a single SMPTE fiber optic cable. This means you can fully power and connect video and audio to cameras up to 2 km away from a studio! The Blackmagic Camera Fiber Converter also adds familiar broadcast studio camera controls to the rear of the camera, plus there are extra connections for audio and industry standard talkback headsets. Plus the converters include 12G-SDI so work with all HD and Ultra HD formats up to 2160p60! Now it’s easy to transform URSA Broadcast G2 into a true broadcast studio camera!

Find Reseller

Get Cameras Closer to the Action!

If you’re working in theaters, music venues or sports stadiums, then you often need to place cameras far away from the control room or broadcast truck. While SDI connections are more common, SDI cable lengths are very limited. Plus, often there is no power where the cameras need to be placed. SMPTE fiber solves this problem because it contains all video, audio, camera control and tally connections via a single cable, but more importantly, it also fully powers the camera and all its accessories. This means you can place the camera up to 2 km away, and power and control it from the studio end. Best of all, SMPTE fiber is a global broadcast industry standard so the cables are readily available.

Broadcast Strength and Enhanced Safety

Broadcast Strength and Enhanced Safety

Blackmagic fiber converters work with standard SMPTE 311M hybrid electrical and fiber optic cables with SMPTE 304M connectors on each end. These cables feature a 2 way fiber pair, data pair and power pair, along with a central strength member for the durability needed for continuous use. Once plugged in, the Blackmagic Studio Fiber Converter automatically performs safety checks then powers on, sending an industry standard 200 volts down the cable to the camera. Both the studio and camera converters constantly monitor if the cable is operating within safe parameters to ensure maximum safety. If a damaged cable is detected, the power is instantly shut down to eliminate any danger.

Adds Extra Studio Camera Controls

Studio cameras are typically operated from the rear of the camera, but broadcast cameras usually have controls on the side of the camera! To solve this problem, the Blackmagic Camera Fiber Converter also adds a wide range of controls and features to the rear of the camera, transforming it into a professional studio camera. You get 2 separate broadcast standard 5 pin talkback connections, 3 return video feeds, 2 extra audio inputs, connections for PTZ and trackers, plus additional DC and D-tap outputs for powering accessories. With all these extra controls added to the rear of URSA Broadcast G2, you can now operate the camera in exactly the same way as a traditional studio camera!

Blackmagic Camera Fiber Converter

Blackmagic Camera Fiber Converter

The Blackmagic Camera Fiber Converter is easy to install as it simply attaches to the back of your URSA Broadcast in place of the battery plate. Then you connect the 12G‑SDI connections between the converter and the camera. The converter uses the SDI tally and control protocols, and it uses SDI channels for talkback. The single unit takes care of the conversions of video and audio, plus it adds the rear camera controls. These controls include buttons for the return feeds, dual intercom controls with the ability to mix in program audio, record, focus and iris controls, headset connectors, audio and more. The converter is also a good place to attach the Blackmagic URSA Studio Viewfinder G2.


Blackmagic Studio Fiber Converter

The Blackmagic Studio Fiber Converter is used at the control room end of the SMPTE fiber cable and it handles converting between the SMPTE fiber and SDI video and audio connections. Plus the studio converter has a built in high capacity power supply to drive the SMPTE fiber cable with enough power to the camera and its accessories. There's even a dedicated talkback connector so you can connect to industry standard talkback systems. The large 5 inch LCD screen on the front panel makes it very easy to monitor the camera feed. The SMPTE fiber connector is on the front panel, so the converter can be mounted on the back of a rack, so you don't need an expensive SMPTE fiber patch panel. 

Dual Channel Talkback with Emergency Backup!

Dual Channel Talkback

The Blackmagic Camera Fiber Converter and Blackmagic Studio Fiber Converter provide 2 dual channel digital talkback connections that are compatible with professional 5 pin XLR talkback headsets. The camera converter even has controls for mixing in program return audio with your talkback headset. The talkback intercoms can be used for both production and engineering. Blackmagic Camera Fiber Converter also includes a standard 10 pin connection for tracker talkback, which is perfect when both headset connections are in use and you need to feed an extra talkback connection for a crane operator.

Professional Broadcast Connections

Blackmagic Studio Fiber Converter

1. Intercom/Tally

The 25 pin intercom and tally connection allows you to connect to 3rd party intercom and tally systems.

2. Analog Audio Out

4 XLR audio outputs include the 2 channels from the camera plus the extra 2 audio channels from the Blackmagic Camera Fiber Converter.

3. Ref In/Out

The reference input will send the video reference up to the camera so it can lock to your system, even when the SMPTE fiber cable length changes.

4. SMPTE Fiber Connector

This is the main connection to the camera and is where the SMPTE fiber connects. This includes pairs for power and backup talkback and the optic fiber.

5. Power Connector

Connect an IEC power cable to the power input on the rear panel to provide power.

6. PTZ

The 9 pin D-Sub connector allows you to connect PTZ controllers via the SMPTE fiber cable to the camera for PTZ heads via the Visca protocol.

7. 12G-SDI In and Out

The 12G-SDI main camera feed supports HD and Ultra HD formats up to 2160p60 and connects to your switcher, ISO recorder or broadcast monitors.

8. USB-C Connector

The USB‑C port allows you to connect a Mac or Windows computer so you can run the utility to update the converter software.


Blackmagic Camera Fiber Converter

1. USB-C Connector

The USB‑C port allows you to connect a Mac or Windows computer so you can run the utility to update the converter software.

2. Headsets

Two industry standard 5 pin XLR connectors allow you to plug in two talkback headsets, which you can use for production or engineering talkback.

3. SMPTE Fiber Connector

This is the main SMPTE fiber connection to the camera which uses a pivoting mount and it includes power and all video, control and audio signals.

4. Molex Connector

The Molex connector is the main power connector and is designed to connect to the camera via the connector normally locked under the battery plate.

5. D Tap Connector

The D-Tap connector allows accessories to be powered from the camera and it includes +12V to power any device that supports up to +11.9V to 14V DC at 2 amps.

6. 12G-SDI In/Out

The 12G-SDI connections on the converter are the main interface to the camera and include all video and audio, as well as camera control and tally.

7. Tracker

The 10 pin Hirose connector has an additional talkback output, plus red and green tally, which is useful when mounting URSA Broadcast on a crane.

8. XLR Audio Inputs

While the camera already has two XLR audio inputs, these two additional audio inputs allow you to embed audio into SDI channels 3 and 4.

9. SDI Out

The 3 HD-SDI outputs are sourced from the studio converter program return inputs.

10. PTZ

The 9 pin PTZ connector controls motorized tripod heads and it’s connected via the SMPTE fiber cable to the PTZ connector on the studio converter.

Advanced 10G Ethernet IP Video Link

Tough Magnesium Metal Design

The Blackmagic Camera Fiber Converter features an extremely durable all metal design that perfectly matches URSA Broadcast G2. It’s built to withstand the harsh demands of outdoor field production and 24/7 operation. The Blackmagic Camera Fiber Converter features standard television industry connections with dust caps, along with an integrated mount plate on top for adding a studio viewfinder. The optical fiber connector on the Blackmagic Studio Fiber Converter is conveniently located on the front panel, right next to the built in 5 inch LCD, so you can plug remote cameras in and instantly see the feed!

Next Page - Accessories

Next Page

Accessories

Viewfinders Arrow

Camera Control Arrow

Fiber Converters Arrow

Accessories Arrow

Tech Specs Arrow

URSA Broadcast

Blackmagic URSA Broadcast G2

Blackmagic URSA Broadcast G2

Designed for broadcast and live production, you get a 6K sensor with +36dB of gain, wide dynamic range and B4 lens mount. Includes Blackmagic RAW, ProRes, H.264 and H.265 record file formats.

HK$34,400

Buy Now
Blackmagic URSA Viewfinder

Blackmagic URSA Viewfinder

High resolution viewfinder for URSA range of cameras includes full HD OLED display and true glass optics for perfect focus.

HK$12,500

Buy Now
Blackmagic URSA Studio Viewfinder G2

Blackmagic URSA Studio Viewfinder G2

Turn URSA Broadcast into a professional studio camera with large and bright 7 inch screen, removable sunshade, adjustable mount and knobs for control of brightness, contrast and focus peaking.

HK$12,450

Buy Now
Blackmagic Focus Demand

Blackmagic Focus Demand

Get accurate focus control with Blackmagic URSA Broadcast G2. Eliminates the need to reach for the lens because you can control the lens direct from the tripod handles.

HK$2,050

Buy Now
Blackmagic Zoom Demand

Blackmagic Zoom Demand

Get zoom control of B4 lenses with power zoom when using the Blackmagic URSA Broadcast G2. Now you can control lens zoom from the tripod handles! Even includes buttons for triggering camera functions.

HK$2,050

Buy Now
New
Blackmagic URSA Broadcast ENG Kit

Blackmagic URSA Broadcast ENG Kit

Turn URSA Broadcast into the ultimate run and gun ENG camera! Includes top handle with 3/8″ mounting points, protective body armor, mic holder, light mount and side panel cradle for accessories.

HK$2,050

Buy Now
Blackmagic URSA Mini Pro EF Mount

Blackmagic URSA Mini Pro EF Mount

The Blackmagic URSA Mini Pro EF Mount kit is available if you ever need a spare EF lens mount in addition to the original EF that comes with your URSA Mini Pro.

HK$1,450

Buy Now
Blackmagic URSA Mini Pro PL Mount

Blackmagic URSA Mini Pro PL Mount

Optional PL lens mount which features contact pins for compatibility with Cooke’s i/Technology protocol allowing lens information to be saved as metadata and used in software like DaVinci Resolve.

HK$2,050

Buy Now
Blackmagic URSA Mini Pro F Mount

Blackmagic URSA Mini Pro F Mount

The URSA Mini Pro F Mount lets you use your favorite Nikon stills lenses with smooth high precision mechanical iris control. Now you can pair digital film quality with classic Nikon AF‑S G and AF‑D series lenses.

HK$3,100

Buy Now
Blackmagic URSA Mini Shoulder Kit

Blackmagic URSA Mini Shoulder Kit

Be ready to shoot anywhere! Kit includes shoulder pad with built in rosettes, rail mounts, integrated tripod quick lock release and top handle.

HK$3,250

Buy Now
Blackmagic URSA Mini Mic Mount

Blackmagic URSA Mini Mic Mount

Add a shock and vibration isolated professional microphone mount to your URSA Mini or URSA Mini Pro camera!

HK$1,150

Buy Now
Blackmagic URSA VLock Battery Plate

Blackmagic URSA VLock Battery Plate

VLock compatible battery plate for attaching third party batteries to URSA cameras.

HK$800

Buy Now
Blackmagic URSA Gold Battery Plate

Blackmagic URSA Gold Battery Plate

Gold mount compatible battery plate with Molex connector for attaching third party batteries to URSA cameras.

HK$800

Buy Now
Blackmagic URSA Mini Pro Shim Kit

Blackmagic URSA Mini Pro Shim Kit

Set of 9 shims and baffle tool for making precise changes to the flange focal distance for URSA Mini Pro's EF, PL or B4 mount.

HK$650

Buy Now
Blackmagic 3G SDI Shield for Arduino

Blackmagic 3G SDI Shield for Arduino

Now you can control Blackmagic Design cameras by inserting control commands into the SDI feed from an Arduino!

HK$900

Buy Now
Blackmagic Camera Fiber Converter

Blackmagic Camera Fiber Converter

Connect URSA Broadcast cameras to live production switchers using SMPTE fiber with all video, control connections and camera power on a single SMPTE fiber cable up to 2 km away!

HK$26,600

Buy Now
Blackmagic Studio Fiber Converter

Blackmagic Studio Fiber Converter

Convert SMPTE fiber to 12G-SDI broadcast equipment while powering remote cameras up to 2 km away. Supports converting SMPTE fiber to 12G-SDI, multiple channels of return video, control and power.

HK$27,250

Buy Now
Blackmagic Studio Fiber Rack Kit

Blackmagic Studio Fiber Rack Kit

Rack mount up to 2 Blackmagic Studio Fiber Converters side by side with this lightweight kit that’s perfect for road cases or equipment racks.

HK$1,200

Buy Now
ATEM Camera Control Panel

ATEM Camera Control Panel

Control up to 4 cameras at one time including iris, shutter speed, white balance, master gain, pedestal, RGB and more!

HK$24,550

Buy Now
ATEM Streaming Bridge

ATEM Streaming Bridge

New video converter that lets you receive a H.264 stream from any URSA Broadcast G2 and convert it back to SDI and HDMI video so you can send it to remote locations around your local Ethernet network, or via the internet globally!

HK$2,150

Buy Now
Blackmagic Universal Rack Shelf

Blackmagic Universal Rack Shelf

Build a custom 1RU solution with Blackmagic Universal Rack Shelf. Mix and match 1/3 and 1/2 rack width Studio Converter, ATEM, HyperDeck Studio, Web Presenter, Teranex Mini and UltraStudio products.

HK$750

Buy Now