2 Independent Scopes with 5 Different Displays!

Independent Scopes with 5 Different Displays!

2 Independent Scopes with 5 Different Displays!

Advanced 8K monitoring solution with dual on-screen scope overlays, HDR, 33 point 3D LUTs and monitor calibration!

Advanced 8K monitoring solution with dual on-screen scope overlays, HDR, 33 point 3D LUTs and monitor calibration!

Teranex Mini 8K HDR features 5 different types of scopes which can be positioned on screen in any location you set in the menus. You can display 2 different scopes at the same time with different waveforms displayed and even different opacity and size. The scopes also support HDR and will automatically change their graticule when a HDR SDI input is detected.

Знайти дилера
Professional Waveform Monitor

Professional Waveform Monitor

The waveform display provides a digitally encoded waveform that shows the luma (brightness) levels of your video signal. Luma levels on the scope will be in roughly the same position relative to those within the frame. For example, if part of your sky is overexposed you will see it in the same horizontal position on the waveform display as it appears in the frame. Depending on your footage, your waveform will look different. If you are monitoring video which is high contrast, you might not see any values in the mid grays. However if your video levels are low, you might see most of the waveform down the bottom of the scope. You could increase gain and watch the waveform rise up towards the top of the scope.

75% and 100% Vectorscopes

75% and 100% Vectorscopes

Vectorscope displays show the colors in a video signal and you can select either a 100% or a 75% vectorscope. The vectorscope display is great for checking color levels from older, analog videotape where you need to adjust chroma levels. Just play back the color bar segment of the videotape, and then adjust the chroma and hue settings to set the colors of the video within the square boxes in the graticule. Vectorscope display is also perfect for color grading, as you can easily see if your video is correctly white balanced or if there is a color tint. If your video has a color tint, you will see the blacks move off center in the scope so it becomes easy to adjust color to remove the tint.

RGB and YUV Parade Display

RGB and YUV parade displays are perfect for color correction and checking for illegal colors within a 100% RGB color space. RGB parade view displays the full height of the individual red, green and blue color channels. Monitoring the levels of each color channel makes color correction straightforward as it's easy to view color balance in the blacks, mids and whites of the video signal. RGB parade lets you identify details common to the red, green and blue channels, making it simple to color balance and remove unwanted color tints. It’s important when color correcting to make sure the video levels are full but not clipped. Some equipment can easily generate illegal 100% RGB levels!

Camera Style Histogram

Camera Style Histogram

Histogram displays are familiar to graphic designers and camera operators and show the distribution of white to black information and how close the detail is to being clipped. You can also see the effects of gamma changes in the video. Black video is shown on the left of the display, and whites are shown on the right. All video should usually be found between the 0% and 100% intervals of the histogram display. Your video is being clipped if it moves below 0% or above 100%. Video clipping can be bad when you’re on a shoot, as detail in the blacks and whites must be preserved for color correction. When shooting, simply keep the video above the black clip, and below the white clip.

Next Page - Характеристики

Наступна сторінка


Learn more about Характеристики Arrow

Teranex Mini 8K HDR

Micro Converter SDI to HDMI 3G

Micro Converter SDI to HDMI 3G

Конвертер для моніторингу з використанням 3D LUT на основі 17 точок для калібрування дисплеїв через наскрізний SDI-вихід. Підтримка DCI та кадрових частот відео, включаючи формати 1080p/24, 1080p/47 та 1080p/48.

2 300 ₴

Micro Converter SDI to HDMI 3G wPSU

Micro Converter SDI to HDMI 3G wPSU

Designed for professional monitoring, with 17 point 3D LUT for calibrating monitors with the 3D LUT available on the SDI loop out! Supports video and DCI rates including 1080p24, 1080p47 and 1080p48. Includes AC power supply with international socket adaptors.

2 700 ₴

Mini Converter SDI to HDMI 6G

Mini Converter SDI to HDMI 6G

Перетворення сигналу 6G-SDI на HDMI в усіх форматах SD, HD та Ultra HD до 2160p/30. Також передбачені наскрізний вихід 6G-SDI, знижувальна конверсія на HDMI-виході, підтримка 3D LUT-табліць, функція миттєвого переключення на HDMI-сигнал і балансні виходи аналогового звуку.

7 700 ₴

Teranex Mini SDI to HDMI 12G

Teranex Mini SDI to HDMI 12G

Перетворення з SDI в HDMI з аналоговим та AES/EBU-звуком при роботі з SD, HD та Ultra HD

21 000 ₴

Teranex Mini Smart Panel

Teranex Mini Smart Panel

Add front panel controls to your Teranex Mini models to adjust settings and to turn features on and off.

3 400 ₴

Teranex Mini SDI to HDMI 8K HDR

Teranex Mini SDI to HDMI 8K HDR

Моніторинг в 8K через HDMI, індикаторні діаграми, підтримка HDR та 3D LUT, а також можливість калібрування в HD, Ultra HD та 8K до 4320p/60

53 700 ₴

Teranex Mini SDI to DisplayPort 8K HDR

Teranex Mini SDI to DisplayPort 8K HDR

Моніторинг в 8K через DisplayPort, індикаторні діаграми, підтримка HDR та 3D LUT, а також можливість калібрування при роботі з форматами HD, Ultra HD та 8K до 4320p/60

54 450 ₴

Blackmagic Universal Rack Shelf

Blackmagic Universal Rack Shelf

Додаткова полиця Blackmagic Universal Rack Shelf розміром 1 RU дозволяє розмістити на ній кілька пристроїв у різних комбінаціях. До них входять рішення Studio Converter, ATEM, HyperDeck Studio, Web Presenter, Teranex Mini та UltraStudio.

3 550 ₴